Lanner LEC-7100 - Manual (Page 30)

27
Bios Settings
Chapter 4
Embedded and Industrial Computing
Exit Menu
Select the Exit tab from the setup screen to enter the Exit
BIOS Setup screen. You can display an Exit BIOS Setup
option by highlighting it using the keys. All Exit
BIOS Setup options are described in this section. The Exit
BIOS Setup screen is at right.
Exit Saving Changes
When you have completed the system configuration
changes, select this option to leave Setup and reboot the
computer so the new system configuration parameters
can take effect. Select Exit Saving Changes from the Exit
menu and press .
Save Configuration Changes and Exit Now?
[Ok] [Cancel]
appears in the window. Select Ok to save changes and
exit.
Exit Discarding Changes
Select this option to quit Setup without making any
permanent changes to the system configuration. Select
Exit Discarding Changes from the Exit menu and press
.
Discard Changes and Exit Setup Now?
[Ok] [Cancel] appears in the window. Select Ok to discard
changes and exit.
Discard Changes
Select Discard Changes from the Exit menu and press
.
Load Optimal Defaults
It automatically sets all Setup options to a complete set of
default settings when you Select this option. The Optimal
settings are designed for maximum system performance,
but may not work best for all computer applications. In
particular, do not use the Optimal Setup options if your
computer is experiencing system configuration problems.
Select Load Optimal Defaults from the Exit menu and
press .