Lanner FW-7610 - Manual (Page 40)

37
Setting up Console Redirection
Appendix C
Network Application Platforms
Appendix C:
Setting up Console
Redirections
Console redirection lets you monitor and configure a
system from a remote terminal computer by re-directing
keyboard input and text output through the console port.
This following steps illustrate how to use this feature.
Connect one end of the console cable to console port 1.
of the system and the other end to serial port of the
Remote Client System.
Configure the following settings in the BIOS Setup
2.
menu for the device: Please refer to the Serial Port
Console Redirection on Chapter 4 BIOS Settings.
BIOS > Advanced > Console Redirection >enabled]
Configure Console Redirection on the client system. 3.
The following illustration is an example on Windows
platform:
A. Click the start button, point to Programs > a.
Accessories > Communications and select Hyper
Terminal.
B. Enter any name for the new connection and
b.
select any icon.
Click OK.
c.
From the “Connect to”. Pull-down menu, select the d.
appropriate Com port on the client system and
click OK.
Select 115200 for the Baud Rate, None. for Flow
e.
contorl, 8 for the Data Bit, None for Parity Check,
and 1 for the Stop Bit.
Note : You may need to enable this function in the
BIOS menu. Look for Console Redirection Setting
under Advanced tab.