Lanner FW-7610 - Manual (Page 19)

16
Bios Settings
Chapter 4
Network Application Platforms
Item Selection
DCU Stream-
er Prefetch
Enable prefetch of next L1 Data Line
based on multiple loads in the same
cache line.
DCU IP
Prefetcher
Enable prefetch of next L1 Line based on
sequential load history.
Intel Virtual-
ization
The Intel VT is a hardware-assisted virtual-
ization. This processor supports Intel Vir-
tualization. Enable or disable this feature.
SATA Controllers Configuration Settings
While entering Setup, the BIOS automatically detects
the presence of SATA devices. The SATA Port items show
“Empty” if no SATA device is installed to the corresponding
SATA port.
SATA Controllers
Item Selection
Enable or
Disable SATA
Controller(s) Set this value to enable or disable SATA
controllers
SATA Mode Selection
The system supports advanced SATA features such as
software RAID.
Item Selection
IDE Mode Set to IDE mode when your want to use the
Serial-ATA hard disk drives as Parallel ATA physical
storage devices.