Lanner FW-7610 - Manual (Page 18)

15
Bios Settings
Chapter 4
Network Application Platforms
Advanced Settings
Select the Advanced tab from the setup screen to enter
the Advanced BIOS Setup screen. You can select any of
the items in the left frame of the screen, such as SuperIO
Configuration, to go to the sub menu for that item. You
can display an Advanced BIOS
Setup option by highlighting it using the keys.
All Advanced BIOS Setup options are described in this
section. The Advanced BIOS Setup screen is shown at
the right. The sub menus are described on the following
pages.
CPU Configuration Settings
You can use this screen to view the capabilities and of your
CPU. You can also use this menu to enable/disable certain
functions of your CPU. Use the up and down keys
to select an item. Use the and keys to
change the value of the selected option. A description of
the selected item appears on the right side of the screen.
The settings are described below.
Item Selection
Limit CPUID
Maximum
Allows legacy operating systems to boot
even without support CPUs with extend-
ed CPUID functions.
Select to enable or disable this function
Execute Dis-
able Bit
Select to enable or disable the No-Execu-
tion Page Protection Technology.
Intel Virtual-
ization
The Intel VT is a hardware-assisted virtual-
ization. This processor supports Intel Vir-
tualization. Enable or disable this feature.
Hardware
Prefetcher
The processor has a hardware prefetcher
that automatically prefetches data and in-
structions from the memory into the Level
2 cache that are likely to be required in
the near future. This reduces the latency
associated with memory reads.
When enabled, the processor’s hardware
prefetcher will be enabled and allowed to
automatically prefetch data and code for
the processor.
When disabled, the processor’s hardware
prefetcher will be disabled.
Adjacent
Cache Line P
Select to enable or disable prefetching of
adjacent line