Lanner FW-7610 - Manual (Page 26)

23
Bios Settings
Chapter 4
Network Application Platforms
LAN Boot Select
The LAN port supports PXE function. The system supports
LAN1 and LAN2 for PXE function. Select to enable either
LAN1 or LAN2 for PXE. For description of the LAN ports,
refer to the Front Panel Feature in Chapter 1 Introduction.
Serial Port Console Redirection
Use this menu to set the settings for BIOS remote access
feature.
Item Selection
Console Redirection Enable or disable BIOS
through remote access
Console Redirection Set-
tings
Enter to view more options
COM0/COM1 Console Redirection Settings
Item Selection
Terminal Type Sets the connection termi-
nal type
Bits per second, Data bits,
Parity, Stop Bits, Flow
Control
Sets the terminal connec-
tion parameters such as
the baud rate, parity check
mechanism, etc.