Lanner FW-7610 - Manual (Page 12)

9
Motherboard Information
Chapter 3
Network Application Platforms
Reset Button Connector (RST1): A hardware reset button
for resetting the system.
2-Pin ATX Power Button Connector (CONN1)
CompactFlash Connector (CF1): It is for connecting a
Compact Flash card to be served as your system’s
storage. The connector is a CF Type II slot which could
fit both CF Type I or CF Type II cards.
PIN DESCRIPTION PIN DESCRIPTION
1 GND 26 CF_CD1#
2 CF_DD3 27 CF_DD11
3 CF_DD4 28 CF_DD12
4 CF_DD5 29 CF_DD13
5 CF_DD6 30 CF_DD14
6 CF_DD7 31 CF_DD15
7 CF_DCS0# 32 CF_DCS1#
8 A10(GND) 33 VS1#
9 OE#(GND) 34 CF_DIOR#
10 A9(GND) 35 CF_DIOW#
11 A8(GND) 36 WE#(VCC3)
12 A7(GND) 37 CF_IRQ#
13 VCC 38 VCC
14 A6(GND) 39 CSEL#(GND)
15 A5(GND) 40 VS2#
16 A4(GND) 41 CF_RESET#
17 A3(GND) 42 CF_IORDY
18 CF_A2 43 CF_DMARQ
19 CF_A1 44 CF_DDACK#
20 CF_A0 45 CF_ACT#
21 CF_DD0 46 CF_DIAG
22 CF_DD1 47 CF_DD8
23 CF_DD2 48 CF_DD9
24 WP(NC) 49 CF_DD10
25 CF_CD2# 50 GND
Jumper Settings
CMOS Jumper (CMOS2): It is for clearing the CMOS
memory and system setup parameters by erasing
the data stored in the CMOS RAM such as the system
password.
Dual USB 2.0 Ports (USB1): This provides two USB 2.0
ports in the front panel.
USB 2.0 Ports (J7): This port is for connecting the USB
module cable. The high-speed USB port complies
with USB2.0 and support up to 480 Mbps connection
speed. It is.
Keyboard and Mouse Interface Connectors (KBMS1):
a 2 x 4 pin header for connecting the PS/2 keyboard
and mouse interface cable.
PIN NO. Function
1-2 Normal (Default)
2-3 Clear CMOS
Pin No. Function
1 USB Power
2 USB0_DAT-
3 USB_DAT+
4 Signal Ground
5 USB Power
6 USB1_DAT-
7 USB1_DAT+
8 GND
3
2
1
1 2 3 4
5 6 7 8
Pin No. Function
1 VCC
2 MSCLK
3 MSDATA
4 KEY
5 KBDATA
6 KEY
7 GND
8 KBCLK
PIN NO. Function
1 PANSW
2 GND
1
2
PIN NO. Function PIN NO. Function
1 Reset
Signal
2 GND
3 NC 4 GND
25......................1
50...................26
9
7
5
3
1
10
8
6
4
2
Pin No. Function
1 USB Power
2 Ground
3 Key
4 USB3_DAT+
5 USB2_DAT-
6 USB3_DAT-
7 USB2_DAT+
8 Key
9 Ground
10 USB_VCC
2 4 6 8
1 3 5 7
4
2
3
1