Chapter 4, Bios settings – Lanner FW-7610 User Manual
Page 20
17
Bios Settings
Chapter 4
Network Application Platforms
Item
Selection
AHCI Mode
Set to AHCI mode when you want the SATA
hard disk drives to use the AHCI (Advanced
Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced SATA
features that increases storage performance or
workloads where multiple simultaneous read/
write requests are outstanding, most often
occurring in server-type applications (native
command queuing). It also facilitates hot
swapping.
RAID
Set to the RAID mode when you want to create
a RAID configuration from the SATA Hard disk
drives. Thie chipset supports software RAID
by
using the Intel® Matrix Storage Manager
software. For more information, visit
ISRT Support
Intel smart response technology (ISRT) Technology
accelerates system boot speed and increases overall
PC performance. System Requirements: For a system to
support Intel Smart Response Technology it must have
the following:
Intel
•
® Z68 Express Chipset-based desktop board
Intel
•
® Core™ Processor in the LGA 1155 package
System BIOS with SATA mode set to RAID
•
Intel Rapid Storage Technology software 10.5 version
•
release or later
Single Hard Disk Drive (HDD) or multiple HDD’s in a
•
single RAID volume
Solid State Drive (SSD) with a minimum capacity of
•
18.6GB
Operating system: Microsoft Windows* Vista 32-bit
•
Edition and 64-bit Edition, Microsoft Windows* 7 32-
bit Edition and 64-bit.