Lanner FW-7610 - Manual (Page 4)

1
Introduction
Chapter 1
Network Application Platforms
Chapter 1:
Introduction
Thank you for choosing the FW-7610. The FW-7610 is a 1U
network communication appliance which is built on Intel®
Sandy Bridge™ based Celeron processor, the most current
Intel processor technology. The FW-7610 comes with 8
ports of Gigabit Ethernet connection and an expansion
capability for extra LAN ports on a LAN module.
The system also features LAN bypass functions (Lanner
Generation II). With Lanner generation II bypass function, the
LAN connections will not be interrupted during system failure or
power-down.
You can customize this platform with a choice between
two versions of CPU and a combination of bypass or non-
bypass ports. The available CPUs are Intel Celeron 827E (one
core) and 847E (two cores).
Please refer to the chart below for a summary of the
system’s specifications.
System Specification
Form Factor 1U
Platform
Processor Options
Intel Celeron 827E, Signal
core 1.4GHz, BGA
Chipset Intel HM65
BIOS
AMI BIOS
64Mb SPI Flash ROM
System
Memory
Technology
DDR3 1066/1333 MHz ECC
or non-ECC
Max. Capacity 8GB per DIMM
Socket 2 x 240P UDIMM
OS Support
Windows 2000, 2003, XP,
7. Linux kernel 2.4 and up,
OpenBSD, FreeBSD
Storage
HDD Bays 2 x 2.5” or 3.5”
CompactFlash 1 x Type II CompactFlash
Networking
Ethernet Ports 8 x GbE RJ45
Bypass
2 pairs of Generation 2
bypass
Controllers 8 x GbE (Intel 82574L)
Expansion Ethernet
Modules 1 module slot
Management Port N/A
Security Accelera-
tion N/A
I/O Interface
Reset Button
1 x reset button
Software reset by default
Console 1 x RJ45
USB 2 x USB 2.0
IPMI via OPMA slot N/A
Expansion
PCIe
2 * PCI-E x4 or
1 * PCI-E x8
PCI N/A
Cooling
Processor Passive CPU heatsink
System
2 x cooling fan with smart
fan control
Environmen-
tal Param-
eters
Temperature,
ambient operating /
storage 0 ~ 40º C / -20~70º C
Humidity (RH),
ambient operating
/ ambient non-
operating 5~90%, 5 ~ 95% non-
condensing