Yaskawa Z1000U HVAC Matrix Bypass - Manual (Page 25)

YASKAWA TOEP YAIZ1D01A Z1000U Matrix Bypass Quick Start Procedure
Z1000U Bypass
Quick Start Procedure
Page 25
of 37
10.1 Perform a test run in HAND mode by following these steps using the HOA keypad.
Note: The safety circuit must be satisifed before the bypass will run in HAND mode. See section 5.1.b for details.
Step HOA Key Press Description HOA Display/Result
10.1.1
2x
Press the ESC key multiple times to return to the Home screen and
operaton mode.
10.1.2 Prepare to initiate an emergency stop during the test run.
Press HAND to give the drive a Run command from HAND mode.
The HAND LED will light and the motor will rotate at the value set to
parameter Z1-09 (10.00 Hz factory default).
Optional: Refer to Step 7.3 for the procedure to change the HAND
frequency reference to a value other than the factory default.
10.1.3 Optional STEP:
Change speed to 30.00Hz with drive running at 10.00 Hz in HAND
mode.
Press ENTER
10.1.4
x 2
Press RESET twice to move cursor to right.
10.1.5
or
Use UP or DOWN arrow to change the parameter value.

Hand Mode Operation
10
STEP