Yaskawa Z1000U HVAC Matrix Bypass - Manual (Page 16)

YASKAWA TOEP YAIZ1D01A Z1000U Matrix Bypass Quick Start Procedure
Z1000U Bypass
Quick Start Procedure
Page 16
of 37
7.9 Apply power to the bypass.
OFF
ON ON
OFF
7.10 Confi rm the drive is confi gured to accept an analog frequency reference signal in AUTO
Mode (Parameter Z1-07).
Confi rm parameter Z1-07 is set to 1 (Analog Input) when using an analog frequency reference signal (0~10 V or 4~20 mA)
Step Key Press Display
7.10.1 Power-up state,
NOTE: The
Frequency reference
screen automatically
appears immediately
after the drive is
energized.
7.10.2
7.10.3
7.10.4
7.10.5
Step Key Press Display
7.10.6
7.10.7
or
“1”
7.10.8
7.10.9
2x

Confi gure the HAND and AUTO Frequency Reference (continued)
7
STEP