Yaskawa G5 Eliminator - Manual (Page 21)

Date: 07/01/04, Rev: 04-07 Page 21 of 27 TM.G5SW.015
5.0 Custom Software Parameters
5.1
New Program Group
Group P
Eliminator Parms
5.2
New Program Function
Function P1
Eliminator P1
Select Eliminator P1 to access parameters P1-01 to P1-10.
Function P2
Eliminator P2
Select Eliminator P2 to access parameters P2-01 to P2-10.
5.3
New Program Parameters
Parameter 1
P1-01 = 0
P1-01 Parameter 1 B B B B
This parameter is provided for user input. Refer to section 2.1.3.
Parameter 2
P1-02 = 0
P1-02 Parameter 2 B B B B
This parameter is provided for user input. Refer to section 2.1.3.
Setting Range: 0 to 65535
Factory Default: 0
Modify During Run: Yes
Modbus Address: 0580H
Setting Range: 0 to 65535
Factory Default: 0
Modify During Run: Yes
Modbus Address: 0581H