Yaskawa G5 Eliminator - Manual (Page 12)

Date: 07/01/04, Rev: 04-07 Page 12 of 27 TM.G5SW.015
Function Controls Range Default Setup
F1-01: PG Pulses/Rev. 0 to 60000 1024 Requires a PG option card
PG Channel 1
E2-02: Motor Poles 2 - 48 4 Flux Vector control only
PG Channel 2 P2-01: Max Pulses In 2 0 to 65535 30720 Requires a PG-W2 card
2.1.5 10000
The 10000 function outputs the number 10000 to all connected functions.
2.1.6 0
The 0 function outputs the number 0 to all connected functions.
2.1.7 Drive
Output
The Drive Output function outputs the percentage of the maximum frequency setting that the
drive is outputting. The value output can range from 0 to 10000.
2.1.8 Drive Output Torque
The Drive Output Torque function outputs the percentage of the drive output torque. The value
output can range from 0 to the maximum torque setting.
Figure 2.1.5
10000 12
Figure 2.1.6
0 18
Figure 2.1.7
Drive
Output
15
Figure 2.1.8
Drive
Torque
Output
11