Yaskawa G5 Eliminator - Manual (Page 16)

Date: 07/01/04, Rev: 04-07 Page 16 of 27 TM.G5SW.015
configured. Switch 2 connects input 04 to output 06 when the configured multi-function input is
turned on.
These functions can be used more than one time in a configuration but all instances will switch
when the associated multi-function input is activated.
Function Controls Range Default Setup
Input 01 Normally Open
Switch 1
Input 02 Normally Closed
Terminal ? - H1-01 to 06 = 80: Switch 1 DI
Input 04 Normally Open
Switch 2
Input 05 Normally Closed
Terminal ? - H1-01 to 06 = 81: Switch 2 DI
2.2.8 Number
Hold
The number hold function will pass the input value to the output when the associated multi-
function input is off. The last value read is held and output to 43 when the multi-function input is
turned on. The hold value is stored in running memory not NVRAM. It will be lost when the
drive is turned off.
Function Controls Range Default Setup
Number Hold Input 42 connected to output 43 Terminal ? - H1-01 to 06 = 85: Number Hold
2.3 Drive
The Drive functions provide a means to direct information into the drive. Information can be
directed to all drive outputs and monitors.
2.3.1 Drive
Speed
The Drive Speed function sends the value input directly to the drive’s speed reference.
2.3.2 Drive Max Torque
Figure 2.2.8
43
42
Hold
Number
H1-0? = 85
Figure 2.3.1
Drive
Speed
ff
Figure 2.3.2
Drive
Max
Torque
fe