Yaskawa Option PG-F3 Motor Encoder Feedback - Manual (Page 17)

5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 51F 1000-Series Option PG-F3 Installation Manual 17
3.
Connect the ground wire (H) to the ground terminal (I) using one of the remaining
screws (C). Connect the other end of the ground wire (H) to the remaining ground
terminal and installation hole on the option (B) using the last remaining provided
screw (C).
Figure 5
Figure 5 Connect the Ground Wire
Note: There are two screw holes on the drive for use as ground terminals (I). When connecting three
options, two ground wires will need to share the same drive ground terminal.
I
B
H
C