Yaskawa 1000 Series Drive Option - CANopen Installation - Manual (Page 7)

1 Preface and Safety
YASKAWA ELECTRIC TOBP C730600 45B 1000-Series Option SI-S3 Installation Manual 7
■ General Safety
General Precautions
• The diagrams in this section may include drives without covers or safety shields to illustrate details. Be sure to
reinstall covers or shields before operating any devices. The option board should be used according to the
instructions described in this manual.
• Any illustrations, photographs, or examples used in this manual are provided as examples only and may not apply
to all products to which this manual is applicable.
• The products and specifications described in this manual or the content and presentation of the manual may be
changed without notice to improve the product and/or the manual.
• When ordering a new copy of the manual due to damage or loss, contact your Yaskawa representative or the
nearest Yaskawa sales office and provide the manual number shown on the front cover.
DANGER
Heed the safety messages in this manual.
Failure to comply will result in death or serious injury.
The operating company is responsible for any injuries or equipment damage resulting
from failure to heed the warnings in this manual.
NOTICE
Do not expose the drive to halogen group disinfectants.
Failure to comply may cause damage to the electrical components in the option card.
Do not pack the drive in wooden materials that have been fumigated or sterilized.
Do not sterilize the entire package after the product is packed.
Do not modify the drive circuitry.
Failure to comply could result in damage to the drive and will void warranty.
YASKAWA is not responsible for any modification of the product made by the user. This
product must not be modified.