SMA WB 5000 - Manual (Page 57)

SMA Technology AG General information
Operating instructions WB50_60-11:FE4105 Page 57
10.1.2 Windy Boy 5000 / 6000 Operating
parameters
Unauthorized changes to the operating parameters may result in:
• Injury or accidents as a result of changing the internal safety
routines in the Windy Boy 5000 / 6000,
• Voiding of the Windy Boy 5000 / 6000 operating approval
certificate
• Voiding of the Windy Boy 5000 / 6000 warranty
Never change the parameters of your Windy Boy 5000 / 6000
without explicit authorization and instructions.
Name Unit Value range
(WB 5000 /
WB 6000)
Factory
settings
(WB 5000
/WB
6000) Description
Betriebsart /
Operating
Mode MPP
UKonst
Stop
Turbine Mode
Insel Mode Turbine Operating mode of the Windy Boy
5000 / 6000:
MPP: Maximum Power Point
UKonst: Constant voltage mode
(Desired voltage is defined in "Usoll-
Konst")
Stopp: Disconnection from mains
supply, no operation
Turbine: Operating mode for wind
turbines, the input voltage is converted
according to the V/I function defined by
U
PV
Start, U
DC
WindStart and
U
DC
WindMax.
Default GER/ENS Used for setting the country specific
information.
dFac-MAX Hz/s 0.005 ... 4,0 0,25 Maximum "Mains frequency change"
before the mains monitoring system
disconnects the device from the mains
supply.
dZac-MAX mOhm 0 ... 20000 350 Maximum "Mains impedance change"
before the mains monitoring system
disconnects the device from the mains
supply.
E_Total kWh 0 ... 200000 Total energy yield (E_Total) and total
hours of operation (h_Total) for the
Windy Boy. This change may be
necessary when you exchange your
Windy Boy 5000 / 6000 and want to
use the data from the old device.
h_Total h 0 ... 200000
Fac-delta- Hz 0 ... 4,5 0,19 Maximum frequency, above (Fac-
Delta+) and below (Fac-Delta-) the
mains frequency of 50 Hz, before the
mains monitoring system disconnects the
device from the mains supply.
Fac-delta+ Hz 0 ... 4,5 0,19