SMA WB 5000 - Manual (Page 15)

SMA Technology AG Unit description
Operating instructions WB50_60-11:FE4105 Page 15
3.2 Device construction
An attractive, functional design is one of the major design objectives of the entire
Windy Boy 5000 / 6000 product range. In its basic configuration, the Windy Boy
5000 / 6000 has the proven status display consisting of three LEDs. An extra display
can be provided already installed or can be retrofitted.
As long as it is installed and commissioned according to the technical specifications,
the Windy Boy 5000 / 6000 can be operated without any further modification or
configuration. The device parameters can however be modified, if required.
An extra communications interface is required for ideal adaptation
of the Windy Boy 5000 / 6000 to suit the particular wind turbine
being used, and this can also be used for reporting operation data.
For further details, please refer to chapter 8 "Expansions”
(page 41).
Characte-
ristic
wind
curve
SMA
Grid Guard L
N
PE
Overvoltage
protection:
Thermally
monitored
varistors
Windy Boy 5000 / 6000 Enclosure IP54 (outside installation possible)
Transformer
Optional
display
(IP65)
Optional
communi-
cations
interface:
RS232
RS485
Powerline
OptiCool
DC - in
put wit
h 4 x 2 DC connect
ors
+
+
+
+
A
C
- output wit
h t
e
rm
inals
Bridge
R