SMA SB 2500 Installation - Manual (Page 38)

Commissioning SMA Solar Technology AG
38 SB25-30-IA-en-51 Installation Manual
6.2 Display Messages during the Startup Phase
• After commissioning, the inverter displays the
device type in the startup phase.
• After 5 seconds or when you tap on the enclosure
lid again, the firmware version of the internal
processors is displayed by the inverter.
• After a further 5 seconds or when you tap again,
the configured country standard is displayed by the
inverter (example: "VDE-AR-N4105").
Show the display messages again (valid from firmware version 4.00)
If you want to view the display messages of the startup phase again while in normal
operation, double tap on the enclosure lid.
SB xxx
Wrxxx