3 opening the dc connector, Opening the dc connector – SMA SB 2500 Installation User Manual

Page 31

background image

SMA Solar Technology AG

Electrical Connection

Installation Manual

SB25-30-IA-en-51

31

5.4.3 Opening the DC Connector

1. Unscrew the cable gland.

2. To release the plug, slot a screwdriver into the side

catch mechanism and lever out. For this purpose,
use a screwdriver with a blade width of 3.5 mm.

3. Carefully pull the DC connector apart.

4. Loosen the clamping bracket. For this purpose, use

a screwdriver with a blade width of 3.5 mm.

5. Remove the cable.

☑ The cable is removed from the DC connector.

This manual is related to the following products:
See also other documents in the category SMA Equipment: