SMA SB 3300-11 Installation - Manual (Page 50)

Troubleshooting SMA Solar Technology AG
50 SB33-38-11-IA-en-62 Installation Manual
9 Troubleshooting
If the inverter displays other blink codes or error messages than those described below,
contact the SMA Service Line.
You will also find a description of display messages during operation, status messages and
measurement channels in the user manual provided.
Do not perform any repairs that are not described here and take advantage of the 24-hour
replacement service (inverter ready for shipping and handed over to a freight-forwarding company
within 24 hours) and the SMA Solar Technology AG repair service instead.
9.1 Blink Codes
green red yellow Status
flashing flashing flashing OK (startup phase)
is glowing continuously is not glowing is not glowing OK (feed-in operation)
is glowing continuously is not glowing Ground fault or varistor
defective
is glowing
continuously OK (initialization)
is flashing quickly
(3 x per second) is not glowing is not glowing OK (stop)
is glowing continuously is not glowing Ground fault or varistor
defective
is flashing slowly
(1 x per second) is not glowing is not glowing OK (waiting, grid
monitoring)
goes out briefly
(approx. 1 x per second) is not glowing is not glowing OK (derating)
is glowing continuously is not glowing Ground fault or varistor
defective
is not glowing is not glowing is not glowing OK (overnight
shutdown or Electronic
Solar Switch is not
plugged or external DC
switch-disconnector is
not connected.)
is glowing/flashing Fault
is glowing continuously is not glowing Ground fault or varistor
defective
is glowing/flashing ground fault or varistor
defective and fault