SMA SB 3300-11 Installation - Manual (Page 40)

Commissioning SMA Solar Technology AG
40 SB33-38-11-IA-en-62 Installation Manual
6.2 Display Messages During the Startup Phase
• After commissioning, the inverter displays the
device type in the startup phase.
• After 5 seconds or when you tap again on the
enclosure lid, the firmware version of the internal
processors is displayed by the inverter.
• After a further 5 seconds or when you tap again,
the configured country standard is displayed by the
inverter (example: "VDE-AR-N4105-MP").
Showing the display messages again (valid as of firmware version 4.00)
If you want to view the display messages of the startup phase again while in normal
operation, tap the enclosure lid twice in quick succession.
SB xxx
Wrxxx