SMA SB 3300 Installation - Manual (Page 64)

Decommissioning SMA Solar Technology AG
64 SB33_38-IEN111851 Installation Guide
6. If a communication cable is available:
– Open the inverter as described in section 7.2 ”Opening the Inverter” (page 43).
– Remove the communication cable from the inverter.
– Close the inverter as described in section 7.3 ”Closing the Inverter” (page 45).
7. Connect the Electronic Solar Switch.
8. Remove the safety screw.
CAUTION!
Danger of burn injuries due to hot enclosure parts!
The inverter's enclosure can become hot during operation.
• Wait until the enclosure has cooled down.
NOTICE!
The Electronic Solar Switch can be damaged if it is plugged on incorrectly!
• Do not tighten the screw inside the handle.
• Insert the handle of the Electronic Solar Switch securely in the socket on the bottom
of the enclosure.
• Check whether the handle of the Electronic Solar Switch is securely connected.