SMA SB 3300 Installation - Manual (Page 15)

SMA Solar Technology AG Assembly
Installation Guide SB33_38-IEN111851 15
4 Assembly
4.1 Safety
4.2 Selecting the Mounting Location
Consider the following requirements when selecting where to install:
• The mounting method and location must be suitable for the inverter's weight and dimensions
(see section 11 ”Technical data” (page 66)).
• Mount on a solid surface.
• The mounting location must at all times be clear and have safe access without the use of
additional aids such as scaffolding or lifting platforms. Any possible service actions are
otherwise limited.
DANGER!
Danger to life due to fire or explosion.
Despite careful construction, electrical devices can cause fires.
• Do not mount the inverter on flammable construction materials.
• Do not mount the inverter in areas where highly flammable materials are stored.
• Do not mount the inverter in areas with a risk of explosion.
CAUTION!
Danger of burn injuries due to hot enclosure parts!
• Mount the inverter in such a way that it cannot be touched inadvertently during
operation.
CAUTION!
Risk of injury due to the heavy weight of the inverter!
• Take the inverter's weight of approx. 38 kg into account for mounting.