9 troubleshooting, 1 blink codes, Troubleshooting – SMA SB 3300 Installation User Manual
Page 52: Blink codes

Troubleshooting
SMA Solar Technology AG
52
SB33_38-IEN111851
Installation Guide
9 Troubleshooting
If the inverter displays blink codes or error messages other than those described in the following
section, contact the SMA Serviceline.
You will also find a description of display messages during operation, status messages and measuring
channels in the user manual provided.
Do not perform any repairs that are not described here and take advantage of the 24-hour
replacement service (inverter ready for shipping and handed over to a haulage company within
24 hours) and the SMA Solar Technology AG repair service instead.
9.1 Blink Codes
Green
Red
Yellow
Status
is glowing continuously
is not glowing
is not glowing
OK
(feeding-in operation)
is glowing continuously is not glowing
Ground fault or varistor
defective
is glowing
continuously
OK
(initialization)
is flashing quickly
(3 x per second)
is not glowing
is not glowing
OK (stop)
is glowing continuously is not glowing
Ground fault or varistor
defective
is flashing slowly
(1 x per second)
is not glowing
is not glowing
OK (waiting, grid
monitoring)
goes out briefly
(approx. 1 x per second)
is not glowing
is not glowing
OK (derating)
is glowing continuously is not glowing
Ground fault or varistor
defective
is not glowing
is not glowing
is not glowing
OK
(overnight shutdown)
is not glowing
Error
is glowing continuously is not glowing
Ground fault or varistor
defective
glowing/flashing
Ground fault or varistor
defective and
disturbance