SMA SB 3300 Installation - Manual (Page 17)

SMA Solar Technology AG Assembly
Installation Guide SB33_38-IEN111851 17
4.3 Mounting the Inverter with the Wall Mounting Bracket
1. Use the wall mounting bracket as a drilling template and mark the positions of the drill holes.
2. Fill in holes that are not required in the wall mounting bracket using the filler-plugs. Insert the
filler-plugs into the wall mounting bracket from the outside (the side that will later be placed
against the wall).
CAUTION!
Risk of injury due to the heavy weight of the inverter.
• Note that the inverter weighs approx. 38 kg.
Mounting material
When mounting the bracket, use fastening material suitable for the mounting surface.