SMA Sensorbox - Manual (Page 27)

SMA Solar Technology AG Mounting the Device
Installation Guide Sensorbox-IEN100914 27
2. Prepare the thermally conductive adhesive included in the delivery according to the
manufacturer's instructions. Observe the processing and hardening times specified by the
manufacturer.
3. Affix the module temperature sensor to the bottom of
a PV module using the thermally conductive
adhesive.
4. Using strips of adhesive tape, affix the module
temperature sensor and the cable to the bottom of the
PV module.
5. Once the thermally conductive adhesive is hardened, remove the adhesive tape strips.
☑ The module temperature sensor is now mounted.