SMA Sensorbox - Manual (Page 26)

Mounting the Device SMA Solar Technology AG
26 Sensorbox-IEN100914 Installation Guide
6.2 Mounting the Temperature Sensor on the PV Module
Requirements for the Mounting Location
Observe the following requirements regarding the mounting location of the module temperature
sensor:
• Select a PV module that remains unshaded throughout the day.
• Do not attempt to extend or shorten the pre-assembled 2.5 m cable.
• The module temperature sensor is affixed to the back of the PV module.
Included Mounting Accessories
Mounting the Temperature Sensor on the PV Module
1. The mounting location should be determined based on the cable length of the sensor and the
applicable site requirements.
Position Quantity Designation
A
1 PT100 module temperature sensor with 2.5 meter connection cable
B 1 Thermally conductive adhesive (protective gloves, hardener and binder) with
instructions and packaging
C 2 Adhesive strips
CAUTION!
Risk of chemical burns from contact with the thermally conductive adhesive.
• Avoid any contact with the skin, mucous membranes and eyes.
• Wear appropriate protective clothing, gloves and goggles when working on the
sensor.
• Follow the safety precautions and instructions from the manufacturer of the thermally
conductive adhesive.