SMA Sensorbox - Manual (Page 23)

SMA Solar Technology AG Mounting the Device
Installation Guide Sensorbox-IEN100914 23
2. Attach the mounting plate onto the module rail with
the screws and slot nuts provided by the
manufacturer of the PV mounting system.
Usually any screw up to M10 in size fits into the slot
nuts.
3. Open the side flaps of the Sunny SensorBox using the
notches as a guide.
4. Fasten the Sunny SensorBox onto the mounting plate
with four hexagonal screws. Make sure the Sunny
SensorBox is oriented correctly (see page 20).
☑ The Sunny SensorBox is now attached to the
mounting rail.
6.1.3 Mounting the Sunny SensorBox on Rafters
Optional Mounting Accessories
SMA order number: Roofan-Ssensor
Position Quantity Designation
A
1 Roof bracket
B 3 Hexagonal wood screws
C 3 Washers for hexagonal wood screws
D 5 M4 hexagonal screws
*
* Pre-mounted on delivery.
E 1 M4 contact washer
*
F 2 Washers
*
G 1 Locking washer
*