SMA SIC 50 - Manual (Page 40)

Failure Search SMA Solar Technology AG
40 SIC50-IA-en-11 Installation Guide
11 Failure Search
11.1 SMA Operation
You can find the description of all parameters and errors in the Sunny Island manual.
11.2 Stand-alone Operation
You can read the error messages through the serial interface using the terminal program. The device
number is shown as x in the following.
Error code Description
Ex=+0000.0 no error
Ex=+0000.2 DC input voltage missing
(also at night and during periods with low solar irradiation)
Ex=+0000.4 overvoltage at DC input voltage
Ex=+0000.8 battery temperature too high or sensor cable interrupted
Ex=+0001.6 battery temperature too low or short circuit in the sensor cable
Ex=+0003.2 charge controller temperature is higher than 90 °C
Ex=+0006.4 battery temperature is lower than -30 °C
Ex=+0012.8 battery voltage is lower than 8.1 V
Ex=+0025.5 short circuit, overload or overcurrent at battery or PV array
(also before first commissioning)