SMA SIC 50 - Manual (Page 33)

SMA Solar Technology AG Electrical Connection
Installation Guide SIC50-IA-en-11 33
Connection Procedure
1. Remove the resistor.
2. Unscrew the lock nut of the M25 metric-thread cable gland (A) and slide it along the cable of
the battery temperature sensor.
3. Remove the seal insert along with the cable opening from the cable gland.
4. Route the cables through the cable openings in the seal insert.
5. Connect the battery temperature sensor cables to the connection terminal (B).
6. Retighten the lock nut of the cable gland.
A B