Section 2, Unpacking and inspection – SMA SB 3800-U User Manual
Page 13

SB3800U-12:SE2006
SMA America
2-1
Section 2:
Unpacking and Inspection
All Sunny Boy inverters are thoroughly tested and inspected before they are packed and
shipped. Although they are shipped in sturdy, recyclable packaging; damage can still
occur during shipping. It is important to carefully inspect the shipping container prior to
beginning the installation. If any external damage to the packaging makes you suspect
the inverter itself could be damaged, or if you find that the inverter is damaged after
unpacking it, report the damage immediately to your SMA dealer and to the shipping
company that delivered the Sunny Boy. If it becomes necessary to return the Sunny Boy,
use the original packaging in which it was delivered.
WARNING: The Sunny Boy 3800U weighs 85 lb. (38 kg). To
avoid injury, be sure to use proper lifting techniques and se-
cure the help of someone to assist in the unpacking and instal-
lation of the inverter.
If you need assistance with a damaged Sunny Boy, contact your SMA dealer or SMA
America. Contact information for SMA America is provided below.
SMA America, Incorporated
12438 Loma Rica Drive
Grass Valley, California 95945
Tel 530.273.4895
Fax 530.274.7271
www.sma-america.com