SMA SB 3800-U - Manual (Page 12)

1-4 SMA America SB3800U-12:SE2006
Installation Overview
This section provides a high-level overview of the installation process so you have an
idea what to expect as you proceed through the rest of the Installation Guide.
The installation process is broken down into the following tasks:
Section 2: Unpacking and Inspection
This section provides instructions and information for unpacking the SB3800U and
inspecting it for shipping damage.
Section 3: Mounting
This section includes guidelines to help you select the best mounting location,
suggestions to insure optimum performance, cautions and warnings that you should
follow to avoid injury and/or equipment damage and step-by-step instructions for
mounting the SB3800U inverter.
Section 4: Input Voltage Configuration
This section includes information on removing the cover, locating primary components
within the inverter and selecting the appropriate voltage configuration for the
installation.
Section 5: Wiring the Sunny Boy 3800U
This section includes guidelines for selecting the correct wire sizes, cautions and
warnings that you should follow to avoid injury and/or equipment damage and step-
by-step instructions for wiring the SB3800U to a PV array, household electrical circuits
and the utility grid. Procedures are also included for connecting optional data-
communication cables.
Section 6: Commissioning
Commissioning involves applying DC input power to the SB3800U, observing the LED
and LCD indicators on the front cover, and resolving any problems that occur.
Section 7: Displays and Messages
This section provides troubleshooting tips and procedures for resolving problems that
may occur during installation and operation.