SMA STP 15000TL - Manual (Page 53)

Grid configurations TN-C, TN-S, TN-C-S, TT (when V
N_PE
< 30 V)
Approvals and national standards, as per
10/2014* AS 4777, BDEW 2008, C10/11:2012, CE,
CEI 0-16, CEI 0-21, EN 50438, G59/3,
IEC 60068-2, IEC 61727, MEA/PEA,
IEC 62109-2, NEN 50438, PPC, PPDS,
RD 1699, RD 661/2007, SI4777,
UTE C15-712-1, VDE 0126-1-1, VDE AR-
N 4105, VFR 2013, VFR 2014
* C10/11:2012: only possible if the three-phase line-to-line voltage is 400 V.
EN 50438: does not apply to all national appendices of EN 50438.
IEC 62109-2: This standard requires that either the multifunction relay in the inverter is used as fault
indicator or that the inverter is connected to Sunny Portal and that the fault alert is activated in
Sunny Portal.
NRS 97-2-1: This standard requires a separate label be attached to the AC distribution board to
indicate the AC-side disconnection of the inverter in case of a grid failure (for further details, see
NRS 97-2-1, Sect. 4.2.7.1 and 4.2.7.2).
MEA/PEA: only applicable to STP 17000TL-10
Climatic Conditions
Installation in accordance with IEC 60721-3-3, Class 4K4H
Extended temperature range -25°C to +60°C
Extended humidity range 0% to 100%
Extended air pressure range 79.5 kPa to 106 kPa
Transport in accordance with IEC 60721-3-2, Class 2K3
Temperature range -25°C to +70°C
Electronic Solar Switch
Electrical endurance in the event of short circuit,
at nominal current of 33 A At least 50 switching operations
Maximum switching current 33 A
Maximum switching voltage 1,000 V
Maximum power 20 kW
Degree of protection when plugged in IP65
Degree of protection when unplugged IP21
Features
DC Connection SUNCLIX DC connector
AC connection Spring-cage terminal
Display LC graphic display
11 Technical Data SMA Solar Technology AG
Operating Manual 53 STP15-17TL-10-BE-en-10