SMA STP 15000TL - Manual (Page 44)

9 Operation
9.1 LED Signals
The LEDs indicate the operating state of the inverter.
LED Status Explanation
Green LED glowing Feed-in operation
If an event occurs during feed-in operation, an event mes-
sage will be shown on the display (for event messages see
the service manual at www.SMA-Solar.com).
flashing The conditions for feed-in operation are not yet met. As
soon as the conditions are met, the inverter will start feed-
in operation.
Red LED glowing Error
If an error occurs, the error message and the correspond-
ing event number will be shown in the display. The error
must be rectified by a qualified person (for troubleshoot-
ing, see the service manual at www.SMA-Solar.com).
Blue LED glowing BLUETOOTH communication is activated.
9 Operation SMA Solar Technology AG
Operating Manual STP15-17TL-10-BE-en-10 44