SMA STP 15000TL - Manual (Page 19)

Figure 3: Recommended clearances
Permitted and prohibited mounting positions:
☐ The inverter must be mounted in one of the permitted positions. This will ensure that no
moisture can penetrate the inverter.
☐ The inverter should be mounted in such way that display messages and LED signals can be
read without difficulty.
Figure 4: Permitted and prohibited mounting positions
5.2 Mounting the Inverter
Additionally required mounting material (not included in the scope of delivery):
☐ Three screws suitable for the support surface (size: M10 at maximum)
☐ Three washers suitable for the screws (diameter: 30 mm at maximum)
☐ If necessary, three screw anchors suitable for the support surface and the screws
☐ For transporting the inverter with a crane: two eye bolts suitable for the weight of the inverter
(size: M10)
☐ To secure the inverter against theft: one padlock suitable for outdoor use
5 Mounting SMA Solar Technology AG
Operating Manual 19 STP15-17TL-10-BE-en-10