beautypg.com

2 interfaces and functions, Interfaces and functions – SMA STP 15000TL User Manual

Page 14

background image

Symbol

Explanation

CE marking
The product complies with the requirements of the applicable EU direc-
tives.

Degree of protection IP65
The product is protected against dust intrusion and water jets from any
angle.

The product is suitable for outdoor installation.

Certified safety
The product is VDE-tested and complies with the requirements of the Ger-
man Equipment and Product Safety Act.

RCM (Regulatory Compliance Mark)
The product complies with the requirements of the applicable Australian
standards.

Korean mark of conformity
The product complies with the requirements of the applicable Korean di-
rectives.

4.2

Interfaces and Functions

The inverter can be equipped or retrofitted with the following interfaces and functions:

BLUETOOTH

Via BLUETOOTH, the inverter can communicate with various BLUETOOTH devices (for information
on supported SMA products, see www.SMA-Solar.com).

Speedwire/Webconnect

SMA Speedwire/Webconnect is a type of communication based on the Ethernet standard. This
enables inverter-optimized 10/100 Mbit data transmission between Speedwire devices in PV
systems and the software Sunny Explorer. The Webconnect function enables direct data
transmission between the inverters of a small-scale system and the Internet portal Sunny Portal
without any additional communication device and for a maximum of four inverters per Sunny Portal
system. In large-scale PV power plants, data transmission to the Internet portal Sunny Portal is
carried out via the SMA Cluster Controller. You can access your Sunny Portal system from any
computer with an Internet connection.

4 Product Description

SMA Solar Technology AG

Operating Manual

STP15-17TL-10-BE-en-10

14

This manual is related to the following products: