SMA STP 15000TL - Manual (Page 21)

3. If the inverter is to be secured against theft, mark
the drill hole for the attachment of the eye bolt.
4. Set the rear panel aside and drill the marked holes.
5. Depending on the support surface, insert the screw anchors into the drill holes for attaching the
rear panel.
6. Secure the rear panel using screws and washers.
7. Hook the inverter into the rear panel. The
enclosure has to be flush with the rear panel on
the right-hand and on the left-hand side.
8. If the inverter has been transported with a crane, remove the eye bolts from the threads on the
top of the inverter and reinsert the filler plugs.
9. Remove all six screws from the lower enclosure
lid using an Allen key (AF 3).
5 Mounting SMA Solar Technology AG
Operating Manual 21 STP15-17TL-10-BE-en-10