HEIDENHAIN TNC 640 (34059x-04) - Manual (Page 522)

Manual operation and setup
15.6 Using 3-D touch probes
15
522
TNC 640 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014
15.6 Using 3-D touch probes
Overview
The following touch probe cycles are available in the Manual
Operation mode:
HEIDENHAIN only gives warranty for the function of
the probing cycles if HEIDENHAIN touch probes are
used.
The TNC must be specially prepared by the machine
tool builder for the use of a 3-D touch probe. Refer to
your machine manual.
Function Soft key Page
Calibrating the effective length 531
Calibrating the effective radius 532
Measuring a basic rotation using a
line
536
Setting a datum in any axis 538
Setting a corner as datum 539
Setting a circle center as datum 541
Setting the centerline as datum 543
Touch probe system data
management
See
User’s
Manual
for Cycles