HEIDENHAIN TNC 620 (340 56x-03) - Manual (Page 12)

12
New F
u
nctions of Sof
tw
a
re
340
56x
-03
New Functions of Software
340 56x-03
„ The M101 function was introduced (see "Automatic tool change if the
tool life expires: M101" on page 152).
„ Tool tables of the iTNC 530 can now be imported in the TNC 620 and
converted to a valid format (see "Importing tool tables" on page 146).
„ The CYCL CALL POS function was introduced (see User's Manual for
Cycles).
„ Local and nonvolatile QL and QR Q parameters were introduced (see
"Principle and Overview" on page 230).
„ You can now perform a tool usage test before starting the program
(see "Tool usage test" on page 154).
„ The M138 "Selection of swivel axes" function was introduced (see
"Selecting tilting axes: M138" on page 371).
„ File functions were introduced (see "File Functions" on page 333).
„ The "Define coordinate transformations" function was introduced
(see "Defining Coordinate Transformations" on page 334).
„ The TCPM function was introduced (see "File Functions" on page
333).
Changed Functions of Software
340 56x-03
„ The status display for Q parameters was improved (see "Checking
and Changing Q Parameters" on page 241).
„ The LAST_USE column was added to the tool table (see "Tool table:
Standard tool data" on page 140).
„ The graphic simulation was enhanced and adapted to the iTNC 530
(see "Graphics (Advanced Graphic Features Software Option)" on
page 438).
„ Touch probe cycles can now also be used in the tilted working plane
(see User's Manual for Cycles).