HEIDENHAIN MSE 1000 Installation - Manual (Page 25)

25
Wiring the power connector (ID 747501-01)
The MSE 1201 includes a power connector that needs to be wired to a suitable power
cord; see Power cord on the previous page.
To wire the power connector:
X X Verify that the power cord is not plugged into the main power supply
X X Wire the power connector according to the illustration on the right
Connecting a power cord
To connect a power cord (ID 747501-01):
X X Verify that the power switch is in the off position
X X Verify that the power cord is not plugged into the main power supply
X X Insert the female end of the power cord into the power connector 4 on the front of
the module
To connect a power cord (ID 747501-02):
X X Verify that there is no power at the source
X X Wire the power cable to the source
7. Initial power­up
To power-up the system (ID 747501-01):
X X Press the On (supply) side of the power switch to power-up the system
To power-up the system (ID 747501-02):
X X Turn power on for the system
Wiring the power connector
ID 747501-01