HEIDENHAIN ND 221 B v.2 - Manual (Page 39)

39
Compensation value table for ND 221 B (length measurement): Factory default setting
Compensation value table Description:
* Start character (*);
ND-221 B MM Model of the unit; unit of measure (MM or IN);
SPACING = 14 Point spacing = 14 (range: 6 – 20)
DATUM = + 0.0000 Datum 0 mm (value input)
CMP. NR. 00 = + 0.0000 Compensation value 0 = 0.000 mm (compensation value 0 is always 0)
CMP. NR. 01 = ————— Compensation value 1 = no value entered
CMP. NR. 02 = ————— Compensation value 2 – 63 no value entered (axis error is not compensated)
CMP. NR. 03 = ————— Compensation value table is empty.
CMP. NR. 04 = —————
CMP. NR. 05 = —————
CMP. NR. 06 = —————
CMP. NR. 07 = —————
.
.
.
.
.
.
.
.
.
.
.
.
CMP. NR. 60 = —————
CMP. NR. 61 = —————
CMP. NR. 62 = —————
CMP. NR. 63 = —————
* Final character (*);
Output Format of the Compensation Value Table