HEIDENHAIN ND 221 B v.2 - Manual (Page 37)

37
Output Format of the Compensation Value Table
Output Format of the Compensation-Value Table
1st line: Start
Each compensation-value output begins with the start character < * > ( HEX: 0x2A)
*
3 characters
2nd line: Counter model designation
Output of model designation and unit of measure
N D - 2 2 1 B M M
13 characters 5 characters 2 characters
Model display unit, left-aligned Unit of meas. End of line
3rd line: Spacing of compensation points
Output of distance between compensation points
P K T A B S T . = 1 4
13 characters 3 char. 6 characters 2 char.
Point spacing left-aligned Sep. block Point spacing End of line
right-aligned