Maintenance, Throttle system – Polaris 2008 Ranger RZR User Manual

Page 107

104

MAINTENANCE

Throttle System

Throttle Body/Idle RPM

Idle RPM is preset by the manufacturer. If the engine idle speed is not

satisfactory, please see your Polaris dealer for adjustment.

Throttle Freeplay Adjustment

1. Remove both seats.

Remove the rear service

panel. See page 35.

2. Locate the throttle cable

adjuster.

3. Squeeze the end of the rub-

ber boot and slide it far

enough to expose the end

of the inline cable adjuster.

4. Loosen the adjuster lock

nut.

5. Rotate the boot to turn the

adjuster until 1/16" to 1/8"

(1.5-3 mm) of freeplay is

achieved at the throttle

pedal. See page 103.

NOTE:

While adjusting, lightly flip the throttle pedal up and down.

6. Tighten the lock nut.
7. Squeeze the end of the rubber boot and slide it over the cable

adjuster to its original position.

Boot

Adjuster

Lock Nut