Maintenance, Filter systems – Polaris 2008 Ranger RZR User Manual

Page 104

101

MAINTENANCE

Filter Systems

Air Filter

Always change the air filter at the intervals outlined in the Periodic

Maintenance Chart beginning on page 75.
1. Access the air box

from behind the left

rear wheel.

2. Remove the air box

cover and inspect the

gasket. It should

adhere tightly to the

cover around the

entire edge.

3. Remove the air filter.
4. Remove the pre-filter

from the main air

filter.

5. Wash the pre-filter in

soapy water, then

rinse and let dry.

NOTE:

Install a new main filter if needed. Do not attempt to clean the main air

filter.

6. Reinstall the pre-filter over the main filter.

NOTE:

Apply a small amount of general purpose grease to the sealing edges

of the filter before installing.

7. Inspect the air box for oil or water deposits. If present, drain them

into a suitable container.

Pre-Filter

Air Box Cover

Air Filter

Gasket