Maintenance, Filter systems – Polaris 2011 Ranger 400 User Manual
Page 77

73
MAINTENANCE
Filter Systems
Air Filter
Always change the air filter at the intervals outlined in the Periodic
Maintenance Chart beginning on page 50. Service the air filter more fre-
quently if the vehicle is operated in wet conditions or at high throttle
openings for extended periods.
1. Lift the cargo box to
access the air box.
2. Remove the air box
cover and inspect the
gasket. It should adhere
tightly to the cover and
seal all the way around.
3. Remove the air filter.
4. Do not attempt to clean
the main element.
Install a new air filter.
Tip: Apply a small amount of
general purpose grease to
the sealing edges of the
filter before installing.
5. Inspect the air box for
oil or water deposits. If present, drain them into a suitable container.
Fuel Filter
Your POLARIS vehicle is equipped with an in-line fuel filter. Have your
dealer replace it after every 100 hours of operation. Do not attempt to
clean the fuel filter.
Air Filter
- 2010 Ranger 400 HO 2010 Ranger 4x4 2010 Ranger EV 2011 Ranger EV 2011 Polaris EV 2011 Polaris LSV 2011 Ranger 4x4 500 EFI 2011 Ranger Crew 500 EFI 2010 Ranger XP 2010 Ranger HD 2010 Ranger 6x6 2010 Ranger Crew 2012 Ranger Diesel 2011 Ranger Diesel 2014 Ranger Diesel 2014 Ranger Crew Diesel 2011 Ranger XP 800 2011 Ranger 800 HD 2011 Ranger 800 6x6 2011 Ranger 800 Crew 2012 Ranger 400 2013 Ranger 400 Midsize 2013 Ranger 500 Midsize 2013 Ranger Crew 500 2013 Ranger Diesel 2012 Ranger XP 800 2012 Ranger 800 HD 2012 Ranger 800 6x6 2012 Ranger 800 Crew 2013 Ranger 800 2013 Ranger 6x6 800 2013 Ranger Crew 800 2012 Polaris EV 2012 Polaris LSV 2012 Ranger Crew 500 EFI 2012 Ranger 500 EFI 4x4