Seat removal, Fuel cap, Features and controls – Polaris 2011 Ranger 400 User Manual
Page 31

27
FEATURES AND CONTROLS
Seat Removal
Pull up on the front of the seat and slide it toward the front of the vehi-
cle.
Install the seat by sliding the tabs into the rear of the seat base. Push
down firmly on the front of the seat until the pins are fully seated into
the grommets.
Fuel Cap
The fuel tank filler cap is located
on the right-hand side of the vehi-
cle near the passenger seat. When
refueling, always use either leaded
or unleaded gasoline with a mini-
mum pump octane number of 87
R+M/2 octane. Do not use fuel
with ethanol content greater than
10 percent, such as E-85 fuel.
This manual is related to the following products:
- 2010 Ranger 400 HO 2010 Ranger 4x4 2010 Ranger EV 2011 Ranger EV 2011 Polaris EV 2011 Polaris LSV 2011 Ranger 4x4 500 EFI 2011 Ranger Crew 500 EFI 2010 Ranger XP 2010 Ranger HD 2010 Ranger 6x6 2010 Ranger Crew 2012 Ranger Diesel 2011 Ranger Diesel 2014 Ranger Diesel 2014 Ranger Crew Diesel 2011 Ranger XP 800 2011 Ranger 800 HD 2011 Ranger 800 6x6 2011 Ranger 800 Crew 2012 Ranger 400 2013 Ranger 400 Midsize 2013 Ranger 500 Midsize 2013 Ranger Crew 500 2013 Ranger Diesel 2012 Ranger XP 800 2012 Ranger 800 HD 2012 Ranger 800 6x6 2012 Ranger 800 Crew 2013 Ranger 800 2013 Ranger 6x6 800 2013 Ranger Crew 800 2012 Polaris EV 2012 Polaris LSV 2012 Ranger Crew 500 EFI 2012 Ranger 500 EFI 4x4