Polaris 2011 Ranger 400 - Manual (Page 26)

22
FEATURES AND CONTROLS
Gear Selector
H: High Gear
L: Low Gear
N: Neutral
R: Reverse
P: Park
Low gear is the primary driv-
ing range for the RANGER.
High gear is intended for use
on hard-packed surfaces with
light loads.
Whenever the vehicle is left unattended, always place the transmission
in PARK.
To change gears, stop the vehicle, and with the engine idling, move the
lever to the desired gear. Do not attempt to shift gears with engine speed
above idle or while the vehicle is moving.
Tip: Maintaining shift linkage adjustment is important to assure proper transmis-
sion function. See your dealer if you experience any shifting problems.
NOTICE: Do not attempt to shift the transmission while the vehicle is moving or
damage to the transmission could result. Always shift when the
vehicle is stationary and the engine is at idle.
Gear Selector