Driving procedure, Operation – Polaris 2011 Ranger 400 User Manual
Page 38

34
OPERATION
Driving Procedure
1. Wear a helmet and eye protection.
2. Sit in the driver's seat and fasten the seat belt.
3. Start the engine and allow it to warm up.
4. Always use the cab nets while riding in this vehicle.
5. Apply the service brakes and shift the transmission into gear.
6. Check your surroundings and determine your path of travel.
7. Keeping both hands on the steering wheel, slowly release the brakes
and depress the throttle with your right foot to begin driving.
8. Drive slowly. Practice maneuvering and using the throttle and
brakes on level surfaces.
9. Do not carry a passenger until you have at least two hours of driving
experience with this vehicle. Never carry more than one passenger
in this vehicle. Never allow a passenger to ride in the cargo box.
- 2010 Ranger 400 HO 2010 Ranger 4x4 2010 Ranger EV 2011 Ranger EV 2011 Polaris EV 2011 Polaris LSV 2011 Ranger 4x4 500 EFI 2011 Ranger Crew 500 EFI 2010 Ranger XP 2010 Ranger HD 2010 Ranger 6x6 2010 Ranger Crew 2012 Ranger Diesel 2011 Ranger Diesel 2014 Ranger Diesel 2014 Ranger Crew Diesel 2011 Ranger XP 800 2011 Ranger 800 HD 2011 Ranger 800 6x6 2011 Ranger 800 Crew 2012 Ranger 400 2013 Ranger 400 Midsize 2013 Ranger 500 Midsize 2013 Ranger Crew 500 2013 Ranger Diesel 2012 Ranger XP 800 2012 Ranger 800 HD 2012 Ranger 800 6x6 2012 Ranger 800 Crew 2013 Ranger 800 2013 Ranger 6x6 800 2013 Ranger Crew 800 2012 Polaris EV 2012 Polaris LSV 2012 Ranger Crew 500 EFI 2012 Ranger 500 EFI 4x4