Polaris 2011 Ranger 400 - Manual (Page 35)

31
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condi-
tion before operating increases the risk of an accident. Always inspect
the vehicle before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 23
80
Brake fluid Ensure proper level 80
Park gear Ensure vehicle does not roll when in
PARK. Ensure PARK light illuminates.
-
Front suspension Inspect, lubricate if necessary 55
Rear suspension Inspect, lubricate if necessary 55
Steering Ensure free operation 82
Tires Inspect condition and pressure 7
83
Wheels/fasteners Inspect, ensure fastener tightness 83
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 27
57
Coolant level Ensure proper level 68
69
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 78
Indicator lights/switches Ensure operation 20
Air filter, pre-filter Inspect, clean 73
Air box sediment tube Drain deposits whenever visible 73
Headlamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
85
Brake light/tail lamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
87
Seat Belts Check length of belt for damage,
check latches for proper operation
25
Cab Nets Check for wear or damage, ensure
proper installation
26