Cab nets, Features and controls – Polaris 2011 Ranger 400 User Manual
Page 30

26
FEATURES AND CONTROLS
Cab Nets
Riding in this vehicle without using the cab nets increases the risk of
serious injury or death in the event of an accident or overturn. Cab nets
must be used by both operator and passenger at all times. Make sure all
latches are secure before operating the vehicle.
Always inspect cab nets for tightness, wear and damage before each use
of the vehicle. Use the strap adjusters to tighten any loose straps.
Promptly replace worn or damaged cab nets with new cab nets, avail-
able from your authorized Polaris dealer.
Securing a Net
1. After entering the vehicle, insert the lower net rod into the net
mount on the floor. Make sure the ball at the end of the rod is prop-
erly secured in the slot at the base of the mount.
2. Connect the latch at the top edge of the net to the receiver latch
mounted on the front frame.
Opening a Net
1. To exit the vehicle, release the top front latch.
2. Rotate the net rearward and slide the lower net rod out of the mount
to remove it.
3. Allow the net to hang freely outside the vehicle while dismounting.
Net Rod
Top
Latch
Rod Mount
Net Rod
- 2010 Ranger 400 HO 2010 Ranger 4x4 2010 Ranger EV 2011 Ranger EV 2011 Polaris EV 2011 Polaris LSV 2011 Ranger 4x4 500 EFI 2011 Ranger Crew 500 EFI 2010 Ranger XP 2010 Ranger HD 2010 Ranger 6x6 2010 Ranger Crew 2012 Ranger Diesel 2011 Ranger Diesel 2014 Ranger Diesel 2014 Ranger Crew Diesel 2011 Ranger XP 800 2011 Ranger 800 HD 2011 Ranger 800 6x6 2011 Ranger 800 Crew 2012 Ranger 400 2013 Ranger 400 Midsize 2013 Ranger 500 Midsize 2013 Ranger Crew 500 2013 Ranger Diesel 2012 Ranger XP 800 2012 Ranger 800 HD 2012 Ranger 800 6x6 2012 Ranger 800 Crew 2013 Ranger 800 2013 Ranger 6x6 800 2013 Ranger Crew 800 2012 Polaris EV 2012 Polaris LSV 2012 Ranger Crew 500 EFI 2012 Ranger 500 EFI 4x4